Embedded Files
Step 1: Prepare the mats
Put the mats in at least 2 litres of water in a suitable container, see picture.
The mats must be immersed to soak up the water properly. Leave for 5 mins.
Step 2: Put Soaked Mats in the Tray
Take the mats from the container and put them onto the clean mesh and tray.
No need to drain the mats, place them in soaking.
Step 3: Sow the seeds
Sow the seeds provided onto each mat using the sowing template provided.
When sowing, use the triangular scoop and one sachet per mat. Take care to distribute them as evenly as possible.
If sowing a variety of different seeds, click on the ⓘ symbol in the Sow Tray Task, this will show you the tray template. If the seeds aren't even, get a fork and move them evenly on the mat.
Step 4: Spray the Mats
Fill the spray bottle with tap water and then liberally spray the top of each mat.
Carefully so not to move the seeds with the force of the water.
Spray each mat for at least ten seconds.
Step 5: Cover
Cover the growing tray with clingfilm and place the tray back in the cabinet.
Take care to not cover the drain pipe with clingfilm.
On the older cabinets - align the pipe on the tray with the socket on the shelf and press down. You should hear a click and the tray should be lying flat and centered on the shelf.
On the new models - slide the tray along the shelf runners and make sure the pipe is in the valve at the back and you can see the tray screws on the runner. (See picture)
Step 6: Complete the sow tray task in the App
In the Evogro app, complete the Sow Tray task, or Manually Record the Sowtray, so the system starts the germination phase.
Report abuse